My Case Mods
| I've created a lot of case mods and have built
several computers.
Some were just assemblies and some are a complete work-over. Most of my mod goodies have been built from scratch. |
|
| Controllers for lights and fans | Modded Cases |
| Screamer
re-build.
|
64
bit Linux box
I've taped up with duct tape and and blue masking tape so the saw will not scar the finish. I also tape it up to keep the saw from chattering.
|
| Master Bay Controller for
Lights & Fans
This controls 5 lights and 5 fans.
|
"THING"
a Totally Modded Case. It's a monster of a case.
what I started with is on the right.
|
| Custom Fan & Light
Matt & I had the same exact case I built this controller for him, 5 lights or fans controlled, all in a spare floppy bay. |
This was my 1st light
controller, built on a floppy bay cover
|
|
Cheap & Easy, Chip Cooler This is a very effective cooling mod
The top of the video card gets quite hot yet has no heat-sink This draws air over the top of the AGP card and blasts the north-bridge. Parts are: Perf Board, Fan, Old PCI Bracket from an old modem or what ever. Paint, screws and some elbow grease.
|
Mike's Video Card and
Chipset Cooler.
My ATI X1950 card was overheating to the point it would just quit, so I built this mod to cool it without voiding the warranty.
|
Dead Cat Mod
I run chkdisk /hairball if kitty gets sick. |
My case had a window on the
top and CD drives look like crap
So I cut the holes and windows in the top of a CD-Drive.
It has a blue LED and is treated with black Teflon.
|
| A Modded Dell
XPS
Stripped, cleaned, and painted. |
Chris's
Tower, Totally modded from scratch by MIKE
This has a 120mm Blow Hole'
|
| a
modded intake duct
|
My
Monitor Mod
This contains the inverter, wiring a 12 volt LED, and the rest of the wiring. |
| Case Modding Tools | |
| Tools
|
|
|
|
|
