Home
Go Up or Get Back
Mike's new MONSTER TOWER CASE from HELL
I found this thing on eBay

I Sniped the bid with a special bidding protocol.

 It's the MONSTER CASE from HELL
Next to it is a Standard Dell Mid-Tower

and a 21" Trinitron.

 Mine's Bigger the YOURS
It's a Phuking Monster

It's some type of older Enermax File server case.

 That 120mm in front is an intake, the real 120mm fan is buried and off-set closer to the mother-board, you can see part of it in front.
Another 120mm fan resides in the back, well above the power supply.

10 bays in front, more hard-drive bays below.

 the Beast
I've started taking it apart and chasing away the dust bunnies.

The question is to go with a clean look or hang some stuff outside the case to make it look like a "Machine"?

 Big ass MoFo
I set fans (120mm x 38mm) on top to get an idea of what goes where.

I need to find a place for the radiator, reservoir and  pump.

Looks like I might off-set the radiator to be in line with drive bays.

I'm planning my own reservoir.

It will be square, clear tubing, maybe twisted if I can find a heat gun and some  weld-on #3.

 

 Planning the Water Cooling now

 
Update:

Things are coming in.

  • Pressure Gage for the water cooling system.
  • Custom 120mm x 240mm radiator.
  • Eheim 1250 Pump at over 316 Gallons per hour.
  • PEX water fittings.
  • Black Krylon Paint
  

radiator  

pex fitting for routing the water cooling system

A CD is exactly 120mm in diameter.
radiator with 1/2" barbs monster radiator  
planning of the Monster planning the radiator and Eheim pump placement planning a water cooled computer  

  • Big-ass radiator, tank, PEX fittings, Tygon tubing.

  • It's coming together.

  • Next is case windows.

  • Now we are planning the radiator and fan placement.

  • Fans are attached directly to the top window, then the radiator goes in a clear acrylic shroud.

Radiator placement 120mm Grills for Fan Templates

Cathode switches
Danger Den's Outstanding H2O block is now in my sweating palms.

Danger Den waterblock Danger Den waterblock lapped bottom Danger Den waterblock for AMD processors

It has wheels too.

Which brings up some ideas for names

"Bitch on Wheels"

"FrankinBox"

ÜBER TOWER

ÙBER BOXZ

Needless to say, it will be painted, modded, illuminated, double radiator, way too many big assed fans, particle accelerator, fusion generator, micro-wave, nut-cracker, vegetable chopper, cigarette lighter and personal vacuum pump.

Shopping List

Kneel before this TOWER of POWER or suffer from your Insolence.

Quote from Apophis, a Goa'uld

Got an Idea? mail to

This Thing page updated 12/01/2005